When installing a fence, you must first mark the corners of the fence with stakes or chalk lines. Next, you must dig holes for the posts. The hole should be at least twice as wide as the post’s diameter. Also, the bottom of the hole should be slightly larger than the top so that the fence post will fit properly.
Once the fence posts have been placed, the posts must be anchored. To do this, you can use wood posts or steel t-posts. Always make sure to use the correct size posts for your fence’s posts. For example, if your fence is going to be 5 feet high, then you need to use four-foot-long posts. You can buy longer posts, if you plan to install a taller fence. After the posts are anchored, you can install the panels.
Depending on the size of your fence, you can use two or three-inch wooden stakes at each corner. You can also use string lines to mark the locations of posts on the fence. To avoid stressing the wood, place supports between each fence panel. Finally, use wedges to level the fence panels. This method will help you build a fence that will last for a long time.
Before you start installing your fence, consult with your neighbors and local authorities. In some cases, homeowners associations require a pre-approved contractor. In addition, some developments require a particular style or color of fences. It’s also a good idea to discuss your plans with your neighbors to avoid conflict. If possible, you can share the cost of installing a fence with them.
Whether you’re installing the fence yourself or hiring a fence installation contractor, the process should last three to five days. Keep in mind that the length of the fence and the type of wood will affect the duration of the process. As a general rule, a fence between 150 and 200 linear feet should take three to five days.
Before installing a fence, walk around the perimeter of the yard and take measurements of the fence line. Check for any obstructions and slopes that might affect your fence installation. You can also pre-measure fence panels to avoid costly mistakes. Once you’ve done this, you can proceed to installing the fence panels. You’ll need to know where the slopes are so that you can buy enough fence panels.
Installing a fence is a great way to improve your home’s curb appeal. It sets you apart from the rest of your neighborhood. Installing a fence in the winter or during the lull in the summer is a great way to invest in your property. The time spent on fence installation will pay off in the end.
Adding gravel in fence post holes will prevent the fence from rotting and allow rainwater to drain away from the posts. This will also extend the life of the fence. Pea gravel is commonly used and is the cheapest and most effective type of gravel. For more details visit Toronto fence company at https://www.torontofencecompany.net/oshawa-on/.